Electrodeposition of Cu-Ni-P-W Composite on Al-6063 Substrate

M. Karunakaran¹ , M. Pugazhvadivu² , V. Gunasegaran³ , G. Gowtham⁴

1. Dept. of Mechanical Engineering, Pondicherry Engineering College, Puducherry, India.
2. Dept. of Mechanical Engineering, Pondicherry Engineering College, Puducherry, India.
3. Dept. of Mechanical Engineering, B.S.A.Crescent Institute of Science and Technology, Chennai – 48, India.
4. Dept. of Quality, Easun-MR Tap Changers Pvt. Ltd., Puducherry, India.

Correspondence should be addressed to: karunakaran2610@gmail.com.

Section:Research Paper, Product Type: Isroset-Journal
Vol.6 , Issue.3 , pp.59-64, Jun-2018

CrossRef-DOI:   https://doi.org/10.26438/ijsrpas/v6i3.5964

Online published on Jun 30, 2018

Copyright © M. Karunakaran, M. Pugazhvadivu, V. Gunasegaran, G. Gowtham . This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
 

View this paper at   Google Scholar | DPI Digital Library

XML View     PDF Download

How to Cite this Paper

496 Views    322 Downloads    80 Downloads

Abstract :
Thin layer coating of metals will improve the mechanical properties. Cu-Ni-P-W composite coatings were prepared by means of coating a thin film on the above of Al-6063 alloy. The aim of this composite coating is to improve the micromechanical properties such as sliding wear resistance and hardness of the Al. The microstructure of coated Al-6063 material was analyzed to determine such that properties. Due to slight increase in P and W content, the grain size refined gradually and the micro-hardness increased. However, on heat treatment, the composite coating exhibits improved wear resistance and better micro-hardness of the coated Al. Also the mechanical properties and tribological study of the coated material were analyzed by various tests such as wear, friction, hardness and surface roughness test and the results were compared and validated with Cu-Ni-P, Cu-Ni-P-W composite coatings. Hence the results shows that Cu-Ni-P-W composites possess higher hardness, better corrosion resistance, good wear resistance, and low coefficient of friction.

Key-Words / Index Term :
Al-6063, Electroplating, Cu-Ni-P-W composite coating, Micro-hardness, sliding-wear

References :
[1] W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge, “Recent development in aluminium alloys for the automotive industry,” Mater. Sci. Eng., vol. 280, no. 1, pp. 37–49, 2006
[2] M. Surender, B. Basu, and R. Balasubramaniam, “Wear characterization of electrodeposited Ni-WC composite coatings,” Tribol. Int., vol. 37, pp. 743–749, 2004
[3] S. Pradeep Devaneyan and T. Senthilvelan, “Electro co-deposition and characterization of SiC in nickel metal matrix composite coatings on aluminium 7075,” Procedia Eng., vol. 97, pp. 1496–1505, 2014
[4] D.S.Stoychev, E.A.Stoyanova and St. Rashkov, "Deposition of thin tin coatings on aluminium alloys", institute of physical chemistry, bulgarian academy of sciences, sofia 1040 (bulgaria), vol. 23, pp. 127–141, 1984
[5] R. Nair, W. Jiang, and P. Molian, “Synthesis of diamond-like carbon coatings on aluminum 6061 T-91 substrates by laser sintering of ultra-nanocrystalline diamond powders,” Surf. Coatings Technol., vol. 202, no. 13, pp. 2935–2944, 2008
[6] S. T. Aruna, V. K. W. Grips, and K. S. Rajam, “Ni-based electrodeposited composite coating exhibiting improved microhardness , corrosion and wear resistance properties,” vol. 468, pp. 546–552, 2009
[7] K. H. Hou, M. D. Ger, L. M. Wang, and S. T. Ke, “The wear behaviour of electro-codeposited Ni – SiC composites,” vol. 253, pp. 994–1003, 2002
[8] S. Wang and W. J. Wei, “Kinetics of electroplating process of nano-sized ceramic particle / Ni composite,” vol. 78, pp. 574–580, 2003
[9] L. Chen, L. Wang, Z. Zeng, and J. Zhang, “Effect of surfactant on the electrodeposition and wear resistance of Ni – Al 2 O 3 composite coatings,” vol. 434, pp. 319–325, 2006
[10] L. Wang, Y. Gao, H. Liu, Q. Xue, and T. Xu, “Effects of bivalent Co ion on the co-deposition of nickel and nano-diamond particles,” vol. 191, pp. 1–6, 2005
[11] L. Chen, L. Wang, Z. Zeng, and T. Xu, “Influence of pulse frequency on the microstructure and wear resistance of electrodeposited Ni – Al 2 O 3 composite coatings,” vol. 201, pp. 599–605, 2006
[12] N. K. Shrestha, T. Takebe, and T. Saji, “Effect of particle size on the co-deposition of diamond with nickel in presence of a redox-active surfactant and mechanical property of the coatings,” vol. 15, pp. 1570–1575, 2006
[13] D. J. R. U, “Electrochemistry in nanoparticle science,” vol. 1, pp. 186–192, 2002
[14] S. Duari, A. Mukhopadhyay, T. K. Barman, and P. Sahoo, “Study of Wear and Friction of Chemically Deposited Ni-P-W Coating under Dry and Lubricated Condition,” Surfaces and Interfaces, 2017.
[15] M. Palaniappa and S. K. Seshadri, “Friction and wear behavior of electroless Ni-P and Ni-W-P alloy coatings,” Wear, vol. 265, no. 5–6, pp. 735–740, 2008
[16] A. Luiz, M. Oliveira, J. D. Costa, M. B. De Sousa, J. Jailson, N. Alves, A. Regina, N. Campos, R. Alexandre, C. Santana, and S. Prasad, “Studies on electrodeposition and characterization of the Ni – W – Fe alloys coatings,” J. Alloys Compd., vol. 619, pp. 697–703, 2015
[17] K. A. Kumar, G. P. Kalaignan, and V. S. Muralidharan, “Direct and pulse current electrodeposition of Ni – W – TiO 2 nanocomposite coatings,” Ceram. Int., vol. 39, no. 3, pp. 2827–2834, 2013
[18] Y. Wang, W. Chen, A. Shakoor, R. Kahraman, W. Lu, B. Yan, and W. Gao, “Ni-P-TiO2 Composite Coatings on Copper Produced by Sol- Enhanced Electroplating,” vol. 9, pp. 4384–4393, 2014
[19] M. F. He, W. Bin Hu, C. Zhong, J. F. Weng, B. Shen, and Y. T. Wu, “Effect of wear conditions on tribological properties of electrolessly-deposited Ni-P-Gr-SiC hybrid composite coating,” Trans. Nonferrous Met. Soc. China (English Ed.), vol. 22, no. 10, pp. 2586–2592, 2012
[20] Tanveer Ahmad Dar, Arpana Agrawal and Pratima Sen,” Role of Ni Doping on Structural, Electronic and Transport Properties of ZnO Thin Films”, IJSRPAS, Vol-3, Issue 2, pp 9-11, 2015