References
[1]. Ailor, R.H., Schmidt, J.W., and Bennett, G.K. (1975), “The design of economic acceptance sampling plans for a mixture of variables and attributes”, A.I.I.E. Trans., 7, 370.
[2]. Case, K. and Bennett, K.(1977). “:The effect of measurement error on variables acceptance sampling” International journal of production research, vol. 15, no.2, 117-128.
[3]. Chapman, S.C.(9172), “The economic design of multivariate acceptance sampling plans, Master’s Thesis”, Virginia Polytechnic Institute and State University, Blacksburg, Virginia. charts based on the sign test”, communicates in statistics-Theory and method vol. 2, 23-31
[4]. Chen, C.H. and Chou, C.Y(2001). “Economic Design of Dodge-Romig LTPD Single Sampling Plans for Variables Under Taguchi’s Quality Loss Function,” Total Quality Management , Vol. 12, pp. 5 11
[5]. Chen, C.H. and Chou, C.Y. (2003). “Applying Quality Loss Function in the Design of Economic Specification Limits for Triangular Distribution,” Asia Pacific Management Review , Vol. 8, pp. 1 12
[6]. Chou, C.Y.,Chen,C.H.,Liu,H.R.,(2001). “Economic design of X chart for nonnormally correlated data”. International Journal of Production Research 39(9),1931–1941.
[7]. Control, edited by DeVor, R. E. and Kapoor, S. G., The Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, MA, U.S.A. pp. 23-36
[8]. Diviney, T.E., and David, N.A. (1963), “A note on the relationship between measurement error and product acceptance”, J. Ind. Engng, 14,218
[9]. Dodge, H. F. and Romig, H. G. (1959). Sampling Inspection Tables, John Wiley, New York, NY, U.S.A.
[10]. Duffuaa, S. O. and Siddiqui(2002). A. W., “Integrated Process Targeting and Product Uniformity Model for Three class Screening,” International Journal of Reliability, Quality and Safety Engineering, Vol. 9, pp. 261-274
[11]. Grubbs, F.E., and Coon, H.J.(1954), “On setting test limits relatve to specification limits”, J. ind. Qual. Control, 10,15.
[12]. Kapur, K. C. (1988).“An Approach for Development of Specifications for Quality Improvement,” Quality Engineering , Vol. 1, pp. 63-77
[13]. Kapur, K. C. and Wang, C. J. (1987).“Economic Design of Specifications Based on Taguchi’s Concept of Quality Loss Function,” Quality: Design, Planning, and
[14]. Kapur,K.C.andCho,B.R(1994).“Economic Design and Development of Specifications,” Quality Engineering, Vol. 6, pp. 401-417
[15]. Kapur. K. C. and Cho, B.-R. (1996).“Economic Design of the Specification Region for Multiple Quality Characteristics,” IIE Transactions , Vol. 28, pp. 237 248
[16]. Li, M.-H. C. and Chou, C.-Y., (2001). “Target Selection for an Indirectly Measurable Quality Characteristic in Unbalanced Tolerance Design,” International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 516-522.
[17]. Li, M.H. C. and Chou,C.Y. (2001). “Target Selection for an Indirectly Measurable Quality Characteristic in Unbalanced Tolerance Design,” International Journal ofAdvanced Manufacturing Technology , Vol. 17, pp. 516-522
[18]. Li, M.-H. C. andWu, F.-W., (2001). “A General Model of Unbalanced Tolerance Design and Manufacturing Setting with Asymmetric Quadratic Loss Function,” Proceeding of Conference of the Chinese Society for Quality, pp. 403-409
[19]. Li, M.-H. C., (1997). “Optimal Setting of the Process Mean for Asymmetrical Quadratic Quality Loss Function,” Proceedings of the Chinese Institute of Industrial Engineers Conference, pp. 415-419
[20]. Li, M.-H. C., (2000). “Quality Loss Function Based Manufacturing Process Setting Models for Unbalanced Tolerance Design,” International Journal of Advanced Manufacturing Technology,Vol. 16, pp. 39-45.
[21]. Li, M.H.C. and Wu.F.W(2001). “A General Model of Unbalanced Tolerance Design and Manufacturing Setting with Asymmetric Quadratic Loss Function,”
[22]. Li, M.-H.C.(1997). “Optimal Setting of the Process Mean for Asymmetrical Quadratic Quality Loss Function,” Proceedings of the Chinese Institute of Industrial Engineers Conference, pp. 415 419
[23]. Liu, H. R., Chou, C. Y. and Chen, C. H.(2003) The effect of correlation on theeconomicdesign of warning limitXcharts.International Journal ofAdvanced ManufacturingTechnology. 22: 306−312.
[24]. Maghsoodloo, S. and Li, M.-H. C., (2000). “Optimal Asymmetrical Tolerance Design,” IIE Transactions, Vol. 32, pp. 1127-1137.
[25]. Montgomery DC (1991) Introduction to Statistical Quality Control, 2nd Ed, pp. 566-567. Wiley, New York.
[26]. Montgomery, D. C.(1991).Introduction To Statistical QualityControl, John Wiley, New York, NY, U.S.A. pp.623-624
[27]. Phillips, M. D. and Cho, B.-R.(2000).“A Nonlinear Model for Determining the Most Economic Process Mean Under a Beta Distribution,” International Journal of
[28]. Phillips, M. D. and Cho, B.-R., (2000). “A Nonlinear Model for Determining the Most Economic Process Mean under a Beta Distribution,” International Journal of Reliability, Quality and Safety Engineering, Vol. 7, pp. 61-74
[29]. Rahim, M. A. and Tuffaha, F. (2004). “Integrated Model for Determining the Optimal Initial Setting of the Process Mean and the Optimal Production Run Assuming Quadratic Loss Functions,” International Journal of Production Research, Vol. 42, pp. 3281 3300 Reliability, Quality and Safety Engineering , Vol. 7, pp. 61 74
[30]. Duffuaa, S. O. and Siddiqi, A.W.(2002). “Integrated Process Targeting and Product Uniformity Model for Three- Class Screening,” International Journal of Reliability, Quality and Safety Engineering, Vol. 9, pp. 261-274
[31]. Schmidt, J.W., Case, K. E., and Bennett, G. K. (1974), “The choice of Variables sampling plans using cost effective criteria”, A.I.I.E. Trans..6, 178.
[32]. Schmidt, R.L. and Peifer, P.E. (1989). An Economic Evaluation of Improvements in process capability for a single level canning problem, Journal of Quality Technology, 21; 16-19.
[33]. Sower, V. E., Motwani, J., and Savoie, J M. (1993). “Are Acceptance Sampling and SPC Complementary or Incompatible ?,” QualityProgress, pp. 8589
[34]. Tagaras, G.(1994). “Economic Acceptance Sampling by Variables with Quadratic Quality Costs,” IIE Transactions, Vol. 26, pp. 29-35
[35]. Taguchi, G., (1986). Introduction to Quality Engineering, Asian Productivity Organization, Tokyo, Japan
[36]. Walsh, J.E., David, H.T., and Fay, E.A. (1959), “Acceptance inspection by variables when the measurements are subject to error”, Ann. Inst. Statist. Math., Tokyo 10,107.s
[37]. Wu, C. C. and Tang, G. R., (1998). “Tolerance Design for Products with Asymmetric Quality Losses,” International Journal of Production Research, Vol. 39, pp. 2529-254
[38]. Wu,C.C. and Tang, G. R.(1998). “Tolerance Design for Products with Asymmetric Quality Losses,” International Journal of Production Research, Vol. 36, pp. 2529 2541
