Volume-11 , Issue-3 , Jun 2024, ISSN 2455-3174 (Online) Go Back

• Open Access   Article

  Production and Characterization of Bioplastic from Starch Extract of Cocoyam (COLOCASIA ESCULENTA) Reinforced With Cellulose Extracted From Luffa Sponge

  Aminu Musa, Ibrahim Usman Gafai

  Research Paper | Journal-Paper (IJSRCS)

  Vol.11 , Issue.3 , pp.1-10, Jun-2024

  Abstract

  Full-Text HTML

  References

  Citation

  Abstract
  Environmental issues brought on by plastics derived from petroleum have gotten worse recently. Due to the harmful environmental impact of conventional plastics, the advancement of biodegradable polymers derived from starch-producing plants for industrial and commercial applications is critical today. The aim of this research work is to produce a reinforced bioplastic using a mixture of two biopolymers, that’s cocoyam starch and luffa sponge cellulose as reinforcing filler. Starch was isolated using wet milling and the cellulose was extracted from Luffa sponge. Two different bioplastics were produced using glycerol as a plasticizer, one with 20% cellulose and the other one without cellulose acted as a control. The physical features of the produced bioplastics were studied, including water absorption and biodegradability. The non-reinforced bioplastic had higher water absorption of 30.03% than the reinforced bioplastic having 14.62%. Tests on biodegradability had shown that non-reinforced bioplastic biodegraded at higher percentage (85.54% in soil rich in nitrogenous bacteria and 69.19% in moist soil) than the reinforced bioplastic (50.96% in soil rich in nitrogenous bacteria and 40.86% in moist soil) within 15 days. The test for mechanical properties had shown that the reinforced bioplastic outperformed the non-reinforced bioplastic in terms of tensile strength with 10.251MPa, strong hydrogen bonding between cellulose and starch may be mostly to blame for this. The inclusion of cellulose reduced the flexibility of the bioplastic, which resulted in a drop of elongation at break from 13% for non-reinforced to 7.8% for reinforced bioplastic. FTIR spectra obtained for both bioplastics were compared with most of the peaks being present. In this approach, petroleum-based plastic pollution can be reduced around the world by producing eco-friendly bioplastic, which might be extensively utilized as an alternative for conventional plastics with greater environmental benefits.

  Key-Words / Index Term
  Starch, Cellulose, Bioplastic, Biodegradability, Tensile strength, Water Absorption, Young modulus, Elongation at Break.

  References
  [1] M. Sprajcar, P. Horvat, and A. Krzan, "Bioploymers and Bioplastics: Plastics Aligned with Nature," Journal of National Institute of Chemistry, Vol.4, Issue.6, pp.45-55, 2012.
  [2] Y. Qin, J. Yang, and J. Xue, "Characterization of antimicrobial poly (lactic acid)/poly (trimethylene carbonate) films with cinnamaldehyde," Journal of Material Science, Vol. 50, pp.1150-1158, 2015.
  [3] N. F. K. Sultan and W. Johari, "The development of banana peel/corn starch bioplastic film," Journal of bioremediation science and technology research, Vol.5, Issue. 1, pp.12-17, 2017.
  [4] C. Chung-Jen and S. Yu-Chin, "Physico-chemical characteristics of media-milled corn starch," Journal of Agriculture and Food Chemistry, Vol.58, Issue.16, pp.9083-9091, 2010.
  [5] M. G. James, K. Denyer, and A. M. Myer, "Starch Synthesis in Cereal Endosperm," Journal of Current Opinion in Plant Biology, Vol.6, Issue.3, pp.215-222, 2003.
  [6] M. B. Agustin, B. Ahmmad, S. M. M. Alonzo, and F. M. Patriana, "Bioplastic based on starch and cellulose nanocrystals from rice straw," Journal of Reinforcement in Plastic Composite, Vol.33, pp.2205-2213, 2014.
  [7] M. J. Bof, V. C. Bordagaray, D. E. Locaso, and M. J. Garcia, "Chitosan molecular weight effect on starch-composite film properties," Journal of Food Hydrocoll, Vol.51, pp.281-294, 2015.
  [8] A. Adewuyi and F. V. Pereira, "Isolation and surface modification of cellulose from underutilized Luffa cylindrica sponge: A potential feed stock for local polymer industry in Africa," Journal of the Association of Arab Universities for Basic and Applied Sciences, Vol.24, Issue.1, pp.39-45, 2017.
  [9] T. P. Mekonnen, H. Mussone, D. Khalil, and K. Bressler, "Progress in bio-based plastics and plasticizing modifications," Journal of Material Chemistry, Vol.43, Issue.1, pp.13379-13398, 2013.
  [10] M. J. V. Ulloa and B. M. G. Punin, "Development of Starch Biopolymers from Waste Organic Materials (Cassava peel) and Natural Fiber (Agave)," Journal of Material Science and Engineering, Vol.2, Issue.11, pp.728-736, 2012.
  [11] M. F. Huangu, J. G. Yu, and X. F. Ma, "Studies on the properties of montmorillonite-reinforced themoplastic starch composites," Journal of Science, Food and Agriculture, Vol.45, pp.017-7073, 2004.
  [12] L. Janssen and L. Moscicki, "Thermoplastic Starch," Willey-VCH Verlag GmbH & Co, Vol.3, pp.54-66, 2009.
  [13] Q. X. Zhang, Z. Z. Yu, X. L. Xie, N. Kimiyoshi, and Y. Kagawa, "Preparation and crystalline morphology of biodegradable starch/clay nanocomposites," Journal of Science, Food and Agriculture, Vol.48, pp.7193-7200, 2007.
  [14] M. F. Huangu, J. G. Yu, and X. F. Ma, "Studies on the properties of montmorillonite-reinforced themoplastic starch composites," Journal of Science, Food and Agriculture, Vol.45, pp.7017-7073, 2004.
  [15] S. M. Emadian, T. T. Onay, and B. Demirel, "Biodegradation of Bioplastic in Natural Environment," Waste Management Journal, Vol.59, pp.526-536, 2017.
  [16] R. Jain and A. Tiwani, "Biosynthesis of Planet Friendly Bioplastic Using Renewable Carbon Source," Journal of Environmental Health Science and Engineering, Vol.13, pp.11-19, 2015.
  [17] I. Leceta, P. Guerrero, and K. De la Caba, "Functional properties of chitosan-based films," Journal of Carbohydrate and Polymer, Vol.93, pp.339–346, 2013.
  [18] B. Ghanbarzadeh, H. Almasi, and A. A. Entezami, "Improving the barrier and mechanical properties of corn starch-based edible films: Effect of citric acid and carboxymethyl cellulose," Industrial Crops and Products Journal, Vol.33, pp.229–235, 2011.
  [19] V. Falguera, J. P. Quintero, A. Jiménez, J. A. Muñoz, and A. Ibarz, "Edible films and coatings: Structures, active functions and trends in their use," Trends in Food Science and Technology, Vol.22, pp.292–303, 2011.
  [20] M. Ghasemlou, N. Aliheidari, R. Fahmi, S. Shojaee-Aliabadi, B. Keshavarz, M. J. Cran, and R. Khaksar, "Physical, mechanical and barrier properties of corn starch films incorporated with plant essential oils," Carbohydrate and Polymer Journal, Vol.98, pp.1117–1126, 2013.
  [21] D. Gómez-Heincke, I. Martínez, M. Stading, C. Gallegos, and P. Partal, "Improvement of mechanical and water absorption properties of plant protein based bioplastics," Journal of Food Hydrocolloid, Vol.73, pp.21–29, 2017.
  [22] C. L. Luchese, T. Garrido, J. C. Spada, I. C. Tessaro, and K. de la Caba, "Development and characterization of cassava starch films incorporated with blueberry pomace," International Journal of Biological Macromolecules, Vol.106, pp.453-462.
  [23] X. Song, G. Zuo, and F. Chen, "Effect of essential oil and surfactant on the physical and antimicrobial properties of corn and wheat starch films," International Journal of Biological Macromolecules, Vol.107, pp.1302–1309, 2018.
  [24] N. Zakaria, N. Muhammad, A. Sandu, and M. Abdullah, "Effect of Mixing Temperature on Characteristics of Thermoplastic Potato Starch Film," IOP Conference Series: Materials Science and Engineering, Vol.2, pp.65-83, 2018.
  [25] Q. X. Zhang, Z. Z. Yu, X. L. Xie, N. Kimiyoshi, and Y. Kagawa, "Preparation and crystalline morphology of biodegradable starch/clay nanocomposites," Journal of Science, Food and Agriculture, Vol.48, pp.7193-7200, 2007.
  [26] J. C. Philp, R. J. Ritchie, and K. Guy, "Biobased plastics in a bioeconomy," Trends in Biotechnology, Vol.31, Issue.2, pp.65-67, 2013.
  [27] T. Barker, "Bioplastic Production from Inexpensive Sources Bacterial Biosynthesis," VDM Publishing House, Vol.31, Issue.2, pp.65-67, 2007.
  [28] S. El-Kadi, "Bioplastic production form inexpensive sources bacterial biosynthesis, cultivation system, production and biodegrability," Cogent Food and Agriculture, Vol.5, Issue 3, pp.67-81, 2010.
  [29] S. Mirel, "Characterization of Natural and High Quality Materials to Improve Perception of Bioplastic," Journal of Cleaner Production, Vol.37, pp.316-325, 2017.
  [30] Z. Nasution, R. Y. Lim, and W. H. WZS, "Banana Peel Flour: An Alternative Ingredient for Wholemeal bread," Unpublished PhD Thesis, University Malaysia Terengganu, 2012.
  [31] K. Noor-Fatima, S. Wan-Lufti, and W. J. Johari, "Development of Banana Peel/Corn Starch Bioplastic Film," Bioremediation Science and Technology Research, Vol.5, Issue.1, pp.12-17, 2017.
  [32] O. S. Lawal, "Composition, Physiochemical Properties and Retrogradation Characteristics of Native, Oxidized, Acetylated and Acid-Thinned New Cocoyam Stach," Journal of Food Chemistry, Vol.8, pp.205-218, 2003.
  [33]. H. Zhang et al., "Extraction of Cellulose from Luffa Sponge and Its Application for Removal of Cu(II) from Aqueous Solution," Journal of Polymers, Vol.10, Issue.1, pp.94-102, 2018.
  [34] E. B. Arikan and H. D. Bilgen, "Production of Bioplastic from Potato Peel Waste and Investigation of its Biodegradability," International Advanced Researches and Engineering Journal, Vol.3, Issue.2, pp.93-97, 2019.
  [35] N. F. K. Sultan and W. Johari, "The development of banana peel/corn starch bioplastic film," Journal of bioremediation science and technology research, Vol.5, Issue 1, pp.12-17, 2017.
  [36] K. am. Marichelvan, M. Jawaid, and M. Asim, "Corn and Rice Starch Based Bioplastic as Alternative Packaging Materials," Journal of Fibers, Vol.2, pp.14-21, 2019.
  [37] K. Jeyasubramanian and R. Balachander, "Starch bioplastic film as an Alternative Food-Packaging Material," Journal of Achievements in Materials and Manufacturing Engineering, Vol.75, Issue.2, pp.78-86, 2016.
  [38] A. Shafqat et al., "Production and Characterization of Rice Starch and Corn Starch Based Biodegradable Bioplastic Using Various Plasticizers and Natural Reinforcing Fillers," Journal of Cellulose Chemistry and Technology, Vol.55, Issue.8, pp.867-874, 2021.
  [39] F. K. Noor and W. J. Lufti, "The Development Sof Banana Peel/Corn Starch Bioplastic Film," Bioremediation Science and Technology Research, Vol.5, Issue.1, pp.12-17, 2017.

  Citation
  Aminu Musa, Ibrahim Usman Gafai, "Production and Characterization of Bioplastic from Starch Extract of Cocoyam (COLOCASIA ESCULENTA) Reinforced With Cellulose Extracted From Luffa Sponge," International Journal of Scientific Research in Chemical Sciences, Vol.11, Issue.3, pp.1-10, 2024