Residual FRAR Control Chart for Correlated Data

P. Poojalakshmi¹ , D. Venkatesan²

Section:Research Paper, Product Type: Isroset-Journal
Vol.6 , Issue.2 , pp.222-227, Apr-2019

CrossRef-DOI:   https://doi.org/10.26438/ijsrmss/v6i2.222227

Online published on Apr 30, 2019

Copyright © P. Poojalakshmi, D. Venkatesan . This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
 

View this paper at   Google Scholar | DPI Digital Library

XML View     PDF Download

How to Cite this Paper

197 Views    172 Downloads    113 Downloads

Abstract :
In this paper, the FRAR residual control chart is used to detect the using the given assignable cause shift in the process mean, using FRAR chart developed by Poojalakshmi and Venkatesan (2019). Which is the extension of the residual ARMA chart of wardell et.al (1994) and illustrated with an example.

Key-Words / Index Term :
Residual, Control Chart, FRAR, Correlated Data, ARMA

References :
[1] Alwan, L. C and. Roberts, H.V (1988) “Time-series modelling for statistical process control”, Journal of Business and Economic Statatistics.6: 87–95.
[2] Box, G.E.P and J.M Jenkins (1970) “Time Series Analysis: Forecasting and Control”, Holden- day; San Francisco.
[3] Brook, D. and Evans, D.A.(1972) “An Approach to the Probability distribution of CUSUM run length” . Biometrika, 59, 539-549.
[4] Crowder, S. V (1986)“A simple method for studying run-length distributions of exponentially weighted moving average charts”, Technimetrics 29: 401–407.
[5] Douglas C. Montgomery., (1991) Introduction to Statistical Quality Control, 2nd Edition, John Wiley and sons, New York.
[6] Engliish, J.R. (1994) “Fixed control limits for continuous flow processes”. IEEE Transections on engineering management, 41, 310-314.
[7] Harris, T. J. and Ross, W.H. (1991) “Statistical process control procedures for correlated observations”, Canadian Journal of Chemical Engineering. 69: 48–57.
[8] Jiang, W. Tsui, K.-L and Woodall, W.H. (2000) A new SPC monitoring method: the ARMA chart, Technometrics 42: 399–410.
[9] Jiang, W. (2007)” Average Run Length Computation of ARMA charts for Stationary Process, “computations in statistics- simulation and computation:, 30(3), 699-716.
[10] Lu, C.W. and Reynolds, M.R , (1999) “ EWMA control charts for monitoring the of autocorrelated processes” Journal of Quality Technology, 31: 166-188
[11] Lucas, J.M. and Saccucci M.S (1990) “Exponentially weighted moving average control schemes: properties and enhancements”, Technometrics 32: 1–12
[12] Montgomery DC and Mastrangelo CM (1991) “Some statistical process control methods for correlated processes”. Technometrics 36: 3-17.
[13] Poojalakshmi. P and Venkatesan, D (2019)” SPC Monitoring Method of FRAR Control Chart” Journal of Engineering and Applied Sciences’, Accepted in SCOPUS.
[14] P.Poojalakshmi and D.Venkatesan (2018). “Time Series Models in Control Chart – A Review ”, International Journal of Advance and Innovative Research , Vol.6 pp. 98-102.
[15] Venkatesan, D., Michele Gallo and Poojalakshmi, P. (2017), “New Family of Time Series Models and its Bayesian Analysis”, Biometrics & Biostatistics International Journal, 6 (4), 1-7.
[16] Wardell, D. G., Moskowitz, H. and Plante, R. D. (1994b) “Run-length distributions of special-cause control charts for correlated processes. (With discussion)”. Technometrics 36, 3–27.
[17] Wardell, D. G., Moskowitz, H. and. Plante R. D (1994a)” Run length distributions of residual control charts for autocorrelated processes”, Journal of Quality Technology 26, 308–317.
[18] Zhang N.F. (1997)”Detection capability of residual control charts for stationary process data” Journal of Applied Statistics., 24: 475-492.
[19] Zhang N.F., (1998) “A statistical control chart for stationary data”, Technometrics, 40: 24- 38.